We have over 25 years of real hands-on experience. We quote by the size of your home, not by counting vents, and we aim to do the job right the first time so we don’t have to come back and fix shortcuts.
Every home and building is different, so we start with an inspection to see what’s happening inside the system, not just what you can see from the outside. We look for buildup, airflow restrictions, leaks, or anything else that might be working against your furnace or AC.
We clean every system using a combination of professional tools: Viper air whips, a high-powered Hypervac vacuum system, and our CastAir industrial compressor. Each tool plays a different role in getting the inside of your ductwork completely cleared. The air whips loosen dust, pet hair, construction debris, and other buildup along the inside of the ducts. High-pressure air from the CastAir compressor pushes everything toward the vacuum, and the Hypervac’s 5,000 CFM suction removes it from the system safely.
In everyday terms, we create one controlled airflow that forces debris out of your ductwork and straight into our equipment, not back into your home.
Once the ducts are cleared, we check airflow and filters so the system is moving air the way it should. It doesn’t matter if we’re working in a small home or a large commercial property — we take the same careful, steady approach on every job. Many of our reviews come from people who noticed the difference in how we work, and we intend to keep it that way.
Your ductwork affects every room, so real air duct cleaning goes beyond vacuuming vents. Dust, pet hair, dander, and debris settle in the main lines and circulate each time the HVAC runs. That buildup restricts airflow, spreads dust, and forces your equipment to work harder.
This applies to homes, townhomes, and multi-family buildings as much as commercial spaces. We routinely service properties managed by HOAs and property managers, plus salons, barbershops, pet facilities, daycares, gyms, restaurants, assisted living communities, and more.
We clean ductwork from the inside using professional equipment, not just what's visible at registers. Because most people never see inside their ducts, we make it transparent by showing you the debris we remove.
When finished, the system moves air as designed: clean, efficient, and free of buildup that circulates through your space.
Clear, upfront pricing based on home or building size — not vent counts or “starting at” bait.
You know what we’re doing, what we’re finding, and what the results mean.
We clean main lines, returns, supplies, transitions, and problem areas most companies skip.
We show you the debris removed so you know exactly what was inside the system.
Service-first approach with zero sales tactics — recommendations are based on what the system actually needs.
Viper Air Whips, Hypervac 5,000 CFM systems, and a CastAir compressor — the same setup used in high-demand commercial environments.
We service multi-family buildings, property management companies, bars and restaurants, salons, pet grooming facilities, medical clinics, gyms, daycares, and assisted living communities.
One visit. One setup. A complete system clean.
Schedule your full air duct cleaning. This is the base service that allows us to access the rest of your system safely and efficiently. Once we’re already inside the ductwork and have the system opened up, that’s the ideal time to address connected components instead of treating them as separate issues later.
Choose one or more of the available add-on options such as furnace cleaning or dryer vent cleaning for $99.99 each to be completed during the same visit. Each service focuses on a different part of the system that directly affects airflow, circulation, and overall air quality.
All your add-ons are completed during the same visit using the same setup and access points, and we focus on doing the work properly—not rushing through it. You avoid extra appointments, and we ensure each part of the system is finished to our standards before we pack up. That level of care is a big part of why people recommend us.
If this sounds like the right fit for your home, you can book your air duct cleaning and add the services you want completed during the same appointment. It’s an easy way to make sure your system is fully taken care of without extra hassle.
*Air Duct Cleaning is required for add-on service pricing of $99.99 each.
A furnace that hasn’t been cleaned can pull dust, debris, and construction residue into the blower compartment, then distribute it right back through your freshly cleaned ductwork. When we clean the ducts but the furnace is overlooked, the air cycle becomes a loop — and you end up fighting the same dust all over again.
Doing this at the same time helps keep the entire air system working as one, instead of treating the furnace and ducts like two separate problems. This is a smart add-on for homes with pets, remodeling history, or systems that haven’t been serviced in several years.
Your AC coil is responsible for cooling the air that moves through the system. When dust and residue collect on the coil, it becomes harder for heat to transfer properly, and the unit has to run longer to get the same result. That extra strain can lead to warm rooms, longer run times, and wear you could have avoided.
Cleaning the coil helps the system move conditioned air more efficiently, the way it was engineered to — especially helpful before the cooling season, after long periods of heating use, or in homes with higher humidity or lots of household activity.
Your air exchanger (or HRV) is what helps your home breathe. It removes stale, humid air and brings in fresh air without sacrificing temperature control. When it gets dirty, airflow slows down and moisture, odors, and stale air have nowhere to go.
Cleaning the HRV helps maintain proper air exchange instead of trapping everything inside the home. If you’ve ever noticed a “stuffy” feeling, lingering cooking smells, slow bathroom humidity clearing, or condensation on windows, this add-on is worth considering.
Mechanical cleaning removes physical debris, but surfaces can still hold residue like odor-causing particles or bacteria. System sanitizing is a targeted follow-up step that treats those surfaces after they’re cleared — not a fragrance, not a fogger, and not a cover-up.
It’s a useful add-on for homes with pets, allergies, past moisture issues, smoke exposure, or if you simply want everything freshened while the system is already open. Many customers choose this one if they’re moving into a previously owned home and want a clean slate.
A clogged dryer vent forces the dryer to run longer and hotter. That buildup restricts airflow, slows drying, and increases overheating risk. When overlooked during HVAC cleaning, it can work against your home's overall efficiency.
Cleaning the dryer vent clears the line so air moves freely and safely. It also prevents moisture, heat, and lint from backing up. If the exterior termination is over eight feet high, there's a $50 fee for additional equipment needed.
Ready to breathe cleaner air and improve energy efficiency? AirRiffic proudly serves homeowners and businesses throughout Minneapolis, St. Paul, St. Cloud, Minnetrista, Hudson (WI), and the surrounding Twin Cities metro.